Products

NANOTEX

It is a water-based, acrylic resin-based, decorative exterior paint produced with nanotechnology. It is used on all kinds of concrete, gas concrete, briquette, brick, plaster and similar mineral surfaces.

Available Packages

15 LT

Properties

Thanks to its photocatalytic feature, the nanoparticles it contains and the porous structure of the resin, over time, organic pollutants that are carried on the surface by being transported with rain water and air are broken down by sunlight and turn into harmless compounds, CO2, water, nitrate and sulfate salts. The salts formed on the surface are cleaned with wind or rain water.
It is extremely resistant to the negative effects of sun rays and salty moisture on the sea shores. As it has high water vapor permeability, it provides moisture to come out. It has high coverage. It is harmless to health, moisture and water resistant, has high alkali and chemical resistance due to its feature that does not contain harmful volatile organic substances.
It is used on all kinds of concrete, gas concrete, briquette, brick, plaster and similar mineral surfaces.

Application Method

At least 24 hours after priming, it should be thinned with water by 10-15% by volume, and two coats should be applied and at least 6 hours should be waited between coats depending on weather conditions. Application should not be done in rainy weather.

Spreading Rate

Depending on the surface;

When using Nanotex Filled Primer, depending on the surface in one coat, an area of ​​9.0-10.5 m2 with 1 L  is painted.
When using Dyobinder, depending on the surface in one coat, 7.5-9 m2 with 1 L is painted.