Products

Astar Macun Tiner

TRANSFER PRIMER

Acrylic emulsion based interior wall primer especially used for the transfer from solvent-based paint to water-based paint as well as on internal plastered solid surfaces and for color transitions.

Available Packages

2,5 LT / 7,5 LT / 15 LT

Properties

Enables fine adhesion of the topcoat paint to the surface by preparing a solid surface. Increases the paint performance and reduces paint consumption.

If a change is desired by applying water-based interior paint on solvent-based paint, it is used as a transition primer. Furthermore, used on all types of concrete, gas concrete, briquette, brick, plaster and similar mineral surfaces as an interior wall surface primer before the application of topcoat products.

Application Method

Blistered, loose and unfit surfaces should be scraped and the old synthetic-painted surface should be mildly sanded to remove oil and dirt. Dyo Transfer Primer is applied in a single coat with a brush or a roller after thinning with water by 10% of the volume. 

Spreading Rate

An area of 14-20 m² can be primed with 1 L in a single coat depending on the surface.

 

Safety Data Sheet (MSDS)

prımer
Astar Macun Tiner

How Much Paint
Do You Need?

Do you know the area?

  • Yes
  • No

Great! Type it below and find out how much paint you need.

Enter the height and length of the surface you want to paint.

This calculation is given according to the average single consumption. The amount to be used may vary depending on the surface condition, application conditions and color.