It is an acrylic emulsion based exterior primer with a filling that prevents salt formation in the structure.

Available Packages

2,5 LT / 7,5 LT / 15 LT


As it has high water vapor permeability, it provides moisture to come out. It prevents salt formation in the structure. It prevents the paint to be applied on it from being absorbed differently by the surface. It has an effect on covering since it is filled.

Application Method

Surface Preparation: Dirty, dusty and loose textured surfaces should be cleaned. However, if the salt exit on the surface continues, application should not be performed until the causes caused by this are eliminated. Brush, roller or spraying method can be used for application.

Priming: Teknotex Filled Primer is thinned by 10-20% in volume and applied as a primer on concrete, plaster and similar raw walls, interior and exterior surfaces as a primer before topcoat application. Top coat paint application should not be done before 6 hours.

Spreading Rate

10-12 m2 area is primed with 1 L depending on the surface in one layer.

Safety Data Sheet (MSDS)


How Much Paint
Do You Need?

Do you know the area?

  • Yes
  • No

Great! Type it below and find out how much paint you need.

Enter the height and length of the surface you want to paint.

This calculation is given according to the average single consumption. The amount to be used may vary depending on the surface condition, application conditions and color.