Products
MASSIVELINE Panel Door Paint - Pearl Shine
It is an acrylic emulsion based, panel door paint that gives pearl shine effect.
Available Packages
0,75 LT
Properties
It provides a shimmery decorative appearance thanks to its special pigment. Odorless, human health and environment friendly, resistant to water, household chemicals and impacts. It adheres perfectly to the surface. It can be used on American doors and all kinds of interior and exterior wood surfaces.
Application Method
The application surfaces should be cleaned from all kinds of oil, dirt, loose and blistered layers.
On solid raw surfaces to be newly painted; It is recommended to use Massiveline Water Based Wood Care Product to increase the strength of the wood. Priming is done with Dyobinder on the surfaces smoothed with Dyo Akrosüper Putty. After priming, Massiveline Water-based Panel Door Paint is applied in two coats of the desired color. Panel Door Paint that gives pearl luster effect 24 hours after painting process, Pearl Gloss is painted in one layer or 2 layers according to the desired gloss.
On old water-based painted surfaces; After lightly sanded and sanding dust is removed from the surface, surface correction is done with Dyo Acrosuper Paste where necessary. Then, local Dyobinder primer is applied only on putty surfaces. 24 hours after the application of two layers of Massiveline Panel door paint on the surface, the Panel Door Paint Pearl Gloss, which gives the pearl glow effect, is painted in one layer or 2 layers according to the desired gloss.
On old painted panel door surfaces; It should be done in the same way as the application system made on old water-based painted surfaces.
On old synthetic painted surfaces; After lightly sanded and sanding dust is removed from the surface, surface correction is done with Dyo Acrosuper Paste where necessary. Then, local Dyobinder primer is applied only on putty surfaces. It is recommended to use Dyo Transition Primer on the entire surface after drying. 24 hours after the application of two layers of Massiveline Panel Door Paint, Panel Door Paint, which gives pearl glow effect, is painted in a single coat or 2 layers according to the desired gloss.
It is ready to use. It is applied as single coat or two layers by brush or roller without thinning.
It is recommended to wait 4-6 hours between coats.
Spreading Rate
Depending on the surface in one coat, 14-17 m2 with 1 L, 12.5-16 m2 with 1 kg are painted.
Safety Data Sheet (MSDS)
MASSIVELINE DOORHow Much Paint
Do You Need?
Do you know the area?
- Yes
- No
Great! Type it below and find out how much paint you need.
Enter the height and length of the surface you want to paint.
This calculation is based on an average of twice the consumption. The amount to be used may vary depending on the surface condition, application conditions and color.