Products

PINOSAN Parquet Varnish Matt

It is a urethane alkyd based, one component, easy to apply parquet varnish.

Available Packages

0,75 LT / 2,5 LT / 12 KG / 15 LT

Properties

Pinosan Flooring Varnish is scratch resistant; forms a film resistant to water, detergent and chemical agents. It is used to protect parquet and all kinds of wooden surfaces from chemical and physical factors.

Application Method

The surface must be dust free, dry and clean. Before applying on old varnished surfaces, scraper must be made until it reaches the raw wood. After the scraper, sanding powders can be wiped thoroughly and applied.
Pinosan Cellulosic Parquet Filler Varnish should be applied on dry and clean new parquet surfaces in 2 coats with 1-2 hour intervals and light sanding should be done after sufficient drying.
It is ready to use. It is applied with brush or roller, 2 or 3 layers depending on the absorbency of the surface. It can be thinned with 10-15% Dyo Synthetic Thinner depending on the applied surface and application tool. It is recommended to wait 24 hours between the coats and make a rough sandpaper.
It gains physical and chemical resistance in 3-4 days.
After the application, the brushes and tools can be cleaned with Dyo Synthetic Thinner.

Spreading Rate

An area of ​​10-15 m2 can be covered with 1 L in a single coat.